Elvoriad™ PathSense Magnetic Motion Sensor Light – Rechargeable LED Hallway & Closet Light 2-Pack
Elvoriad™ PathSense Magnetic Motion Sensor Light – Rechargeable LED Hallway & Closet Light 2-Pack
Light where you need it—without reaching for a switch.
PathSense is designed for small everyday moments when full room lighting feels unnecessary: opening a closet, walking through a hallway at night, approaching a stair landing, or reaching into a cabinet. Its slim light bar combines ambient-light detection with PIR motion sensing so Auto mode activates primarily when movement is detected in a darker environment.
Designed Around the Way You Live
A considered balance of modern form, useful controls, and atmospheric illumination—created to add function without introducing visual clutter.
PIR Motion Detection
Automatically activates when qualifying movement is detected.
Ambient-Light Sensing
Auto mode is designed to avoid unnecessary activation in a sufficiently bright environment.
Magnetic Mounting System
Lift the light away from its mounting plate whenever charging is needed.
Soft 3000K Warm White
Provides useful orientation lighting without the feel of bright overhead illumination.
USB-C Rechargeable
Eliminates routine disposable-battery replacement.
ON / AUTO / OFF Modes
Choose continuous illumination, sensor-controlled operation, or off.
Product Configuration
- Set: 2 lights
- Approx. per light: 8.0 in × 1.5 in × 0.5 in
- Output: approx. 60 lumens
- Color temperature: 3000K
- PIR detection angle: approx. 120°
- Typical detection distance: up to approx. 10 ft under suitable conditions
- Auto shutoff: approx. 20 seconds after motion is no longer detected
- USB-C rechargeable; indoor use only
What's in the Box
- 2 × PathSense Lights
- 2 × Magnetic Mounting Plates
- 2 × USB-C Charging Cables
- 1 × Quick-Start Guide
⚠ Safety & Use Notice
Supplemental convenience lighting only—not emergency, code-required stairway, or primary safety lighting. Sensor performance varies with installation height, ambient temperature, movement direction, obstacles, and surrounding light. Do not install directly over a stove, shower, bathtub, or other wet/high-heat location. Adhesive mounting may not be suitable for every wall finish.
Quick User Manual
Charge both lights before installation.
Attach each mounting plate only to a clean, dry, compatible surface.
Select AUTO for motion activation, ON for continuous light, or OFF for storage.
Remove the lamp from the magnetic plate for charging.
Inspect adhesive mounting periodically and reposition if necessary.